background image

HV-3C

READ THIS FIRST!  

 

 

 

 

 

Any changes or modifications not expressly approved by MILLENNIA MEDIA, INC. could 

void your authority to operate this equipment under the EC or FCC rules. 

1. Copyright: You acknowledge that no title to the intellectual property in the HV-3C is trans-

ferred to you. 

2. Inspection: Inspect packing box(es), HV-3C, and cable(s) for damage, unusual marks, or 
shortages. It is your responsibility to report damage, shortage, or misshipments in a timely man-

ner.  Millennia Media and/or its dealers will not be responsible for claims arising from damage 

in shipping, nor will claims for shortage or misshipments be honored, more than 10 days after 
ship date.

3. Read this manual carefully and completely before attempting to use the HV-3C. Improper 

operation could result in damage to product. It is the user's responsibility to understand the safe 

use and operation of this device.

4. The shipping box of the HV-3C system will include (1) Owner's Manual, (2) HV-3C, (3) a 
UL approved power cord, (4) Owner's Registration Card. Fill out the Owner's Registration Card 
and return to Millennia Media at your earliest ability.

The material contained in this manual consists of information that is property of Millennia 
Media, Inc. and is intended solely for use by the purchasers of the equipment described in this 
manual. Millennia Media, Inc. expressly prohibits the duplication of any portion of this manual 
or the use thereof for any purpose other than the operation and/or maintenance of the equip-
ment described in this manual without the express written permission of Millennia Media, Inc.. 
Under copyright laws, this manual may not be duplicated in whole or in part without the writ-
ten consent of Millennia Media, Inc..  

HV-3C is a trademark of Millennia Media, Inc.  All other trademarks are property of their 
respective holders. Serial numbers are located on the rear left side of each unit. We suggest that 
you record the serial numbers in the space provided below. Refer to it whenever you call an 
authorized Millennia Media repair facility or the manufacturer. Make sure that you return your 
completed warranty card immediately. 

Features and specifications subject to change without notice.
© 2007- Millennia Media, Inc., All rights reserved

Serial Nos. ______________________________________________________________

Purchase Date ___________________________________________________________

Where Purchased _________________________________________________________

Summary of Contents for HV-3C













Reviews: