Congratulations on having purchased (or received) this fine MRI-822MX TempMinder®. If you have any questions or
concerns, feel free to contact us at any time (information below). These instructions are purposely non-technical
(written by Minder’s “non-engineering” staff members only).
1.
Read below “Know your controls,” insert the batteries – ENJOY!
2.
Keep the instructions, you will need them to set HI/LO alerts and clear min/max memory.
KNOW YOUR TempMinder® MRI-822MX CONTROLS!!!
Receiver Rear
“IN” press to display indoor information
“CH” press to change channels. Press and hold (2 seconds) to clear remote info and force a new search
“MEM” used to review and clear temperature and humidity Minimum & Maximum history
“UP” use when setting Hi/Lo temperature alert levels
“ALARM ON/OFF” Turns the Temperature alerts on or off (HI/LO visible or not)
“HI/LO” Use to set the upper or lower temperature alerts for each channel
“C/F” Hopefully no explanation required!!!
“LIGHT” activates really cool blue backlight for 10 seconds
Functions:
Large easy to read display
Receive remote temp and humidity from up to 3 locations w/trend arrow (extra
RS-MX (RS211/213)
transmitters sold separately)
One RS-MX (RS211/213) remote transmitter included
Indoor temperature & Humidity (°C or °F) w/trend arrows
Three humidity comfort level icons
HI/LO programmable temperature and/or humidity alerts on all 3 remote channels.
Min/Max temp/humidity memory
Low battery indicator
Ultra BLUE LED backlight
Specifications:
-
Remote Temperature Range:
-30°C to + 60°C (-22°F to +140°F)
-
Remote transmission Distance: Max 130 meters (426 ft)
-
Temperature Accuracy:
+/- 1.5°C (2.5°F)
-
Humidity Accuracy:
+/- 5%
-
Humidity Range:
20% to 95%
-
Power Supply:
4 “AAA” batteries (not incl.)
