background image

http://mini-box.com, Cool Embedded PCs 
 

 

7) Connect the LED wire to the LED output of your M1-ATX / M2-ATX (consult PSU 
manual) for LED pins.  

VoomPC™ Automotive PC Enclosure

 

Mini-ITX Car PC Enclosure

 

 
8) Connect the ON/OFF wire harness (provided in the PSU package) to the M1-ATX 
ON/OFF controller and to the ON/OFF motherboard switch. (consult your PSU manual).  
 

 

9) (Optional) Connect the Amp enable wire harness to your Amp. Please pay special 
attention to the polarity of the wires. NOTE: Your Amplifier remote control unit actually 
needs only one wire (RMT), GND is optional. 

 

 
10) Hook up Monitor, Keyboard, etc and test your system by turning ignition ON. 
 
11) Secure the VoomPC using the 4 front/back mounting screws. If you don’t want to drill 
holes into your car chassis, stick large Velcro pads to the bottom plate of the VoomPC 
(the hook side) and attach to your car’s carpet – a strong adhesion will be formed. 

Installation Guide 

Version 1.1 

P/N VOOM-01

 

 

4.0 Power Connector Wiring Diagram 

 

 

 (NOTE: 

Versions sold after 01/01/2006 will have the AMP RMT GND wire 

black

)

 

Figure 1.3, power connector diagram 

 

 

Connector type is Molex “mini-fit JR” series, 2 x 4 configuration. Consult 

www.molex.com

 

for additional information on housings and mating pins (male/female). All “mini-fit JR” 
parts can be purchased on-line from www.digi-key.com. 
 
NOTE: The Black and Green wire harness labeled “not connected” is intended to special 
projects use. For example , should you need additional 5V or 12V output, you could take 
advantage of this pre-installed wires.

 

 

 

 
Before you start… 

 

6.0 Mechanical

 

 
-Dimensions: 210(W)x254(L)x56(H)mm 

Please take a moment and read this manual before you install the VoomPC™ in your  
vehicle. Often times, rushing into unit installation can result in serious damage  
to your motherboard, power supply and probably your car’s electrical system.  
 
The VoomPC has a wire harness that need to be connected to the car’s electrical 
system. During installation, 

always

 

double check the polarity

 of your wires with a 

voltmeter.

 

-Weight, including packaging: 2.85Kg 
 

5.0 Support and warranty 
 

Standard Hardware Warranty 1Year / US, 2 Year EU 

 

Installation support: 30days via email, support@mini-box.com. 
Additional accessories can be purchased on-line from www.mini-box.com. 

 

 

VoomPC  Installation Guide                                                  Page 4 

Reviews: