Thank you for choosing Mobile Edge!
The Ultra-Portable Wireless Mouse uses
the latest RF wireless technology at 27MHz
that frees you from the traditional wired
mouse. You can use your wireless optical
mouse more freely and improve your
efficiency. Also, the USB adapter stores
conveniently in the mouse, saving both
power and space while you’re on the road.
Product Features
• Radio frequency of 27MHz.
• 256 ID code prevents interference
from other RF devices.
• Automatic sleep function saves power for
longer battery life.
• Ultra-portable design with integrated USB
adapter for minimum space consumption.
• 1 Year Warranty
System Compatibility
IBM PC and Win 95/98/Me/2000/XP/Vista
Mac OS X
Adapter Installation
1. Press the arrow button on top of the Mouse
(Figure B) to release adapter.
2. For standard USB connection, connect the
adapter directly into an available USB port.
3. If you use a PS/2 connector, please plug in
the adapter/connector to your computer prior
to start-up.
Install Battery
1. Press the button on the mouse upper cover and
slide the battery cover down (Figure A)
2. Insert the 2 AAA batteries according to the
polarity marks on the battery grooves.
3. Push the battery cover forward until you hear
it snap into place.。
ID Pairing
1. Place mouse near the adapter.
2. Press the ID button on the adapter, then press
and hold the ID button on the bottom of the
mouse. The mouse laser will flash quickly, then
hold steady. When the light is steady, you have
successfully paired the mouse to the
adapter.
Please note:
1. The mouse will save power with an automatic
sleep function, please press any key or scroll
the wheel to wake the mouse.
2. If you want to turn off the mouse, press and
hold the ID switch on the mouse bottom for
3 seconds. To turn on the power, press the ID
switch again.
3. The mouse may not work smoothly on a glossy
desk, glass, any reflecting surface, or 3D
mouse pad.
4. When you are moving the mouse, if the low-
power indication light flickers, please change
to new batteries.
5. You may need to re-pair the mouse after
changing the batteries. If so, simply follow the
previously stated pairing instructions.
6. The mouse will shut down automatically when
the adapter is placed inside, so it will not use
battery life while traveling.
Caution
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
*。Reorient or relocate the receiving antenna.
*。Increase the separation between the equipment and
receiver.
*。Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
User Guide
Part #: MEAM03
Figure A
Figure B
info@mobileedge.com
www.mobileedge.com
714.399.1400
U
ltra
-P
ortable
W
ireless
o
Ptical
M
oUse
