background image

MANUAL

Electric System Convector  

ESK 180-110

Content

Möhlenhoff Wärmetechnik GmbH
Museumstraße 54a
DE-38229 Salzgitter
Germany

Internet: www.moehlenhoff.com
e-mail: contact@moehlenhoff.de

  8-D24-53-031.12     ESK 180 -110  

Symbol key

Warning: Danger zone

Warning: Danger of electrical voltage

Warning: Hand injuries

Warning: Hot surface

Useful hint/advice

Product overview ................................................. 2

  Scope of Supply ................................................ 2
  Standard Components ..................................... 2  
  Component for Night Setback Control ........... 2
  Overview ........................................................... 3

Product informations ........................................... 4

  Intended Use .................................................... 4
  Product Description ......................................... 4
  Areas of Application ........................................ 4
  Dimensions ....................................................... 5
  Technical Data .................................................. 5
  Identification Label .......................................... 5

Preconditions ........................................................ 6

  Expert Knowledge ........................................... 6
  Site of Installation  ........................................... 6
  Installation Situation ....................................... 6

Operating Mode ................................................... 7

  Convection Principle ........................................ 7

Installation ............................................................ 8

  Installation Preparation ................................... 8
  Height Adjustment   ........................................ 8
  Free/Full load Capacity ..................................... 8
  Installation Preparation ................................... 9
  Protection Cover .............................................. 9
  System Extensions ............................................ 10
  Electrical Connection ....................................... 10
  Circuit Plan ....................................................... 11
  Internal Wiring ................................................. 12
  Detailed Connection Plan ................................ 12
  Connection Plan ............................................... 13
  Designer Grille Roll .......................................... 14

Start-up ................................................................. 15

  Preparation for Start-up .................................. 15
  Operation/Use .................................................. 15

Maintenance  ........................................................ 16

  Maintenance/Cleaning ..................................... 16
  Declaration of Conformity .............................. 17
  Manual Storage ................................................ 17
  Technical Support ............................................. 17
  Copyright .......................................................... 17

Summary of Contents for ESK 180-110





















Reviews: