Hand Crimp Tool for .090 (2.3mm²) Slip-On Receptacles
Doc No: ATS-6381952HM
Release Date: 12-04-08
UNCONTROLLED COPY
Page 1 of 6
Revision: B
Revision Date: 08-11-10
INSULATION
CRIMP
▲
SEE NOTE
BRUSH
STRIP
LENGTH
BELL MOUTH
CRIMP HEIGHT
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR
CRIMP
TWISTING
Application Tooling
Specification Sheet
Modular Crimp Head
Order No. 63819-5270
Hand Crimp Tool
Order No. 63819-5200
FEATURES
%
A full cycle ratcheting hand tool ensures complete crimps
%
Ergonomically designed soft handles
%
Precisely designed crimping profiles with simple contact positioning
%
Easy handling due to outstanding force ratio
%
Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
%
Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V),
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: .090 (2.3mm²) Slip-On Receptacle Terminal for AVSS 0.3 – 0.5mm² wire.
Terminal Series No.
Terminal Order No.
Wire Size and Type Insulation Diameter
Strip Length
Available in Reel only
mm² (AVSS)
mm
In.
mm
In.
35768
35768-0110 35768-0120
0.30–0.50
1.40-1.70 .055-.067 5.00-5.60 .197-.236
DEFINITION OF TERMS
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
TYPE 4A
