Tool Kit for 250 Slip-in Receptacle Terminals
Doc No: ATS-6382575HM Release Date: 05-17-13
UNCONTROLLED COPY
Page 1 of 8
Revision:A
Revision Date: 05-17-13
INSULATION
CRIMP
BRUSH
STRIP LENGTH
CONDUCTOR
CRIMP HEIGHT
FRONT
CUT-OFF TAB
SEAM
BELL MOUTH
WIRE
Application Tooling
Specification Sheet
Tool Kit
Order No. 63825-7570
Hand Crimp Tool
Order No. 63825-7500
FEATURES
%
A full cycle ratcheting hand tool ensures complete crimps
%
Ergonomically designed soft handles
%
Precisely designed crimping profiles with simple contact positioning
%
Easy handling due to outstanding force ratio
Tool kits are easily installed into the Hand Crimp Tool or the 63816-0300 Power Crimp Head which is installed
into the 63816-0200 (110 V) or the 63816-0250 (220 V) Battery Powered Tool.
Many different Tool kits can be used with a single Battery Powered Tool.
This tool is IPC/WHMA-A-620 Class 2 and RoHS compliant.
SCOPE
Products: .250 Slip-on Receptacle Terminals for 10-14 AWG Wire.
Terminal
Series No.
Terminal Order No.
Wire Size
Insulation Diameter
Strip Length
IPC/WHMA-A620 (1)
Terminal Insulation
Maximum (2)
Reel Form Only (3) AWG mm²
mm
In.
mm
In.
mm
In.
35725
35725-2710
35725-2740
10
5.25 3.80-4.55 .150-.179
5.30
.209
5.20-5.80 .205-.228
12
3.30
3.80
.150
5.30
.209
14
2.00
N/A
N/A
5.30
.209
(1) To achieve optimum IPC-A620 insulation crimps, use this insulation OD range.
(2) Overall insulation OD specification for terminal.
(3) The terminals above are reeled parts only. Customer to cut off terminal from reel: 0.50 mm (.020”) maximum
DEFINITION OF TERMS
TYPE 4C
