AT7050 Air Crimp Tool Head
Doc No. 64005-0900
Release Date: 10-10-02
UNCONTROLLED COPY
Page 1 of 7
Revision: F
Revision Date: 05-11-05
Air Powered Crimp Tool Head
Operating Instruction Sheet
And Specifications
Part No. 64005-0900
Eng. No. AT 7050
(Replaces 19283-0048)
FEATURES
Quick-change tool head for the 19279-0001 (AT-200)
Tooling kit is interchangeable with other kits in the 64001 and 64003 Series
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Pneumatic powered crimp tools help reduce fatigue and discomfort from repetitive manual crimping
SCOPE
Nylon closed end connectors 12–22 AWG. This tool head is intended for use in the 19279-0001 (AT-200) either hand held or with
optional bench adapter 19078-0307 (ATBA) and foot switch.
Testing
Mechanical
The tensile test or pull test is a means of evaluating the mechanical properties of the crimped connections. The following charts
show the UL specifications for various wire sizes. The tensile strength is shown in pounds and indicates the minimum acceptable
force to break or separate terminal from the conductor.
Wire Size (AWG) UL – 486 C
22 8
20 10
18 10
16 15
14 25
12 35
* UL – 486 C – Closed end connectors and Wire Nuts.
The following is a partial list of the product part numbers and their specifications that this tool is designed to run. We will be adding
to this list and an up to date copy is available on www.molex.com.
Wire Size
Terminal
No.
Terminal
Eng No. (REF)
AWG mm²
Wire Combinations
19160-0009 NC-2212
12 - 22
(3.30-0.35)
See Chart 1
19160-0010 NC-2212-L
12 - 22
(3.30-0.35)
See Chart 1
19160-0011 NC-2212-BA
12 - 22
(3.30-0.35)
See Chart 1
