AT-1992 Hand Crimp Tool
Doc No:ATS-640070100
Release Date: 10-03-02
UNCONTROLLED COPY
Page 1 of 15
Revision: J
Revision Date: 08-08-13
Air Powered
Crimp Tool Head
Krimptite
and
VersaKrimp
Application Tooling
Specification Sheet
Order No. 64007-0100
Engineering No. AT 1992
FEATURES
Quick-change tool head for the 19279-0001 (AT-200)
Tooling kit is interchangeable with other kits in the 64001 and 64003 Series
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position for each of the
three nests
3-nested tool eliminates the need for additional tools
Pneumatic powered crimp tools help reduce fatigue and discomfort from repetitive manual crimping
SCOPE
Products: Krimptite
/ VersaKrimp
Terminals and Splices 10–22 AWG and 6.0mm² - 0.5mm². This tool head is
intended for use in the 19279-0001 (AT-200) either hand held or with optional bench adapter 19078-0307 (ATBA)
and foot switch.
Testing
The tensile test, or pull test, is a means of evaluating the mechanical properties of the crimped connections. The
following chart shows the various specifications for different wire sizes and types. The
tensile
strength is shown
in
lbs (newtons)
and indicates the minimum acceptable force to break or separate the terminal from the
conductor.
Wire Size
Minimum Tensile Strength
(lbs. (newtons))
AWG
mm²
*UL - 486 A
*UL – 486 C
**Military Class 2
EN 60352-2
EN 61238-1
22
8 (36)
8 (36)
15 (67)
0,5
14 (60)
11 (50)
20
13 (58)
10 (45)
19 (85)
0,75
19 (85)
17 (74)
18
20 (89)
10 (45)
38 (169)
1,0
24 (108)
22 (99)
16
30 (134)
15 (67)
50 (223)
1,5
34 (150)
33 (149)
14
50 (223)
25 (111)
70 (312)
2,5
52 (230)
56 (248)
12
70 (312)
35 (156)
110 (490)
4,0
70 (310)
89 (397)
10
80 (356)
40 (178)
150 (668)
6,0
81 (360)
100 (446)
*UL - 486 A - Terminals (Copper conductors)
*UL - 486 C - Butt Splices, Parallel Splices
**Military Class 2– Military Approved Terminals
EN 60352 -2 – Telecom and signal cables
EN 61238 -1 – Power Cables
