MINI CLOCK WITH
DAY DATE & ALARM
Two in one. Desk or Wall Clock.
Instruction booklet
Mode d’emploi
Bedienungsanleitung
www.mondaine.com
GGM.D029 Ed. 11.13
Thank you for purchasing a Mondaine Clock.
This model, from our «two-in-one» Collection,
can be used as a wall clock, or a desk clock.
Wall clock
Place a type AA 1.5V battery in compartment
(a)
Set the time (see below)
Use the cut-out area
(B)
to hang the Mini Clock on
a hook or nail on the wall.
Desk clock
Place a type AA 1.5V battery in compartment
(a)
Set the time (see below)
Insert the stand
(1)
as shown on the back. Make
sure that the position of the screw
(2)
is through
the holes
(3)
of the stand
(1)
and the case back.
Fix the stand
(1)
to the clock by turning and
tightening the screw
(2)
.
setting alarm
Make sure that the «TIME/ALARM»
(4)
button is
pushed in. Following the arrow direction turn the
«TIME/ALARM»
(4)
button to set the desired alarm
time.
Push the «ON/OFF»
(5)
alarm button up to set the
alarm to «ON».
Push the «ON/OFF»
(5)
alarm button down to
switch the alarm «OFF».
setting time anD calenDar
To set the time and day, (Mon.-Sun.) pull out the
«TIME/ALARM»
(4)
button and turn it following the
arrow direction. The day in the calendar window
will move to the next day every second time that
the hour hand passes 12 o‘clock.
Push in the «TIME/ALARM»
(4)
button after setting
the correct day and time.
to set the Date (1-31)
To set the correct date (1-31) depress the «DATE»
button
(6)
lightly and turn it following the arrow
direction.
The date will automatically change nightly when
the hour/minute hands are between 23.30pm and
2.30am.
english
D
AT
E
TIME / DAY
ALARM
ON
OFF
B
D
AT
E
TIME / DAY
ALARM
ON
OFF
D
AT
E
TIME / DAY
ALARM
ON
OFF
5
4
6
2
1
3
3
a
