MTWTK-V1-010104
Pg
1 of 4
Copyright 2002-2004, Monster Tower, LLC
Kicker KB600 Tower Brackets
Installation Instructions and Owners
Manual
Monster Tower, LLC
1205 Alpha Drive
Alpharetta, GA 30004
Phone: 877-77-Tower or 770-410-3451
Fax: 877-232-6538 or 770-234-3833
www.MonsterTower.com
Support@MonsterTower.com
THANK YOU FOR YOUR BUSINESS. IF YOU ARE NOT COMPLETELY SATISFIED IN ANY WAY
WITH YOUR NEW BRACKETS, PLEASE CONTACT US. Our entire purpose as a company is to
offer great products at affordable prices that our customers love.
Please take a few minutes to read the installation instructions and become familiar with the
speaker and installation before beginning to ensure a high quality, trouble free installation and
use. If you have any questions during your installation give us a call at 877-77-Tower or e-mail
Support@MonsterTower.com
NOTES ON INSTALLING AND USING YOUR NEW SPEAKER BRACKETS
TOOLS: A 5 mm and a 6 mm Allen wrench, and an 11/32” bit are required for installation
Loctite or equivalent thread locker is recommended for all threads
For best performance, provide 100W-RMS at 4 Ohm to each speaker
Speakers can be easily removed by removing the two knobs that attach the speaker to the
speaker bracket
Speakers can be pointed to the rider, the cockpit of the boat or the front of the boat by
loosening the knobs and rotating the speaker
Regularly check all hardware to make sure it is tight
Although the speakers are weather resistant and designed for outdoors use, do not spray
directly into the grill with high pressure water
Speakers can be painted by scuffing the surface with a Scotchbright pad and using
catalyzed enamel automotive paint. Remove grill and tape speakers for painting
