background image

Turbo steam iron 

steam/spray/shot

Please read and keep these instructions

Getting the best from your new iron...

Safety first

Caution must be used when handling this appliance as it does get
very hot. Always switch off the unit and allow to cool before cleaning
or storing.

Jet cleaning

Your  iron  will  give  the  best  ironing  results  and  will  last  longer  if  you
apply jet cleaning after each period of ironing.

RN40655 MUK Rev 6

If you have a problem or complaint, please call our dedicated UK based helpline

before returning your product to the retailer from where it was purchased.

UK Helpline:  0844 871 0953 
Replacement Parts:  0844 873 0719
Ireland Helpline:  1800 409 119

Upon registration with Morphy Richards

(UK & ROI only)

Register  online  for  your  2  year

guarantee.  See  back  of  this

instruction book for details.

(UK and Ireland customers only)

www.morphyrichards.co.uk

!

To improve the life of your new product and to ensure the cleanliness of your
clothes, we strongly recommend the use of distilled or demineralised water.

RN40655MUK Rev6:RN40655MUK Rev6  04/11/2009  10:40  Page 1

Summary of Contents for RN40655









Reviews: