background image

Steam Generator

RN332100 MUK Rev1

* Register online for your 2 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)

Please read and keep these instructions for future use 

IMPORTANT: To reduce limescale problems which would not be covered by the
guarantee, we recommend the use of a mix of 50% tap water and 50% distilled,
deionised or demineralised water (available from most large supermarkets).

Never  use  battery  topping  up  fluid  or  water  containing  any  substances  like
starch, sugar, fragrant additives or defrosted water from a refrigerator.

Remember to clean and descale your steam generator.

Failure to adhere to the above guidelines will invalidate your guarantee.

IF YOU HAVE ANY DIFFICULTY WITH THIS PRODUCT,

INSTEAD OF TAKING IT BACK TO THE RETAILER, TRY:

1.  

The instruction booklet    

2.  

Refer to www.morphyrichards.com

3.  

Or call our helpline:  UK: 0344 871 0944,  EIRE: 1800 409 119  

(For UK & Eire customers only)

Register your guarantee online: 

www.morphyrichards.co.uk/support

We'll keep you updated with special offers, competitions and important product information.

RN332100 MUK Rev1.qxp_IB  01/08/2018  16:11  Page 1

Summary of Contents for SPEED STEAMPRO













Reviews: