background image

Copyright 2019  -  Morse Mfg. Co., Inc. 

 

Form PL82AM (0212-0213) 

(Updated 24 May, 2019 11:58 AM)

  

 

1

The Specialist In Drum Handling Equipment

Model 82AM

Mobile-Karrier / Palletizer  

with Spark Resistant Parts

Operator’s Manual 

for Morse Mobile-Karrier / Palletizer

with Spark Resistant Parts

Model 82AM

Serial Number 0212 to 0213 (MMYY)

Receiving Procedures

Every Morse drum handler is inspected prior to shipping. However, 

damage may be incurred during transit.

Check for visible damage. If you choose to accept damaged 

• 

freight, always sign noting the damage on the 

Bill of 

Lading

Document the damage and have the truck driver sign. We 

• 

recommend keeping a digital camera at your receiving dock 

for this purpose. 

Open packages expeditiously to check the condition of the 

• 

goods. There is only a 24 hour window to notify the carrier 

of any concealed damage. 

Immediately 

• 

report all damage to the shipping company!

 

Then you may contact Morse for assistance with your 

freight claim. 

Morse Manufacturing will not be held responsible for any 

• 

damaged freight that is not signed for as damaged.

Limited 2 Year Warranty

Morse drum handling equipment is guaranteed against defects in 

workmanship or materials for two years when used properly within 

its rated capacity. Warranty does not cover wear from normal use 

or damage from accident or abuse. Motors and other purchased 

parts carry the warranties of their manufacturers.

For warranty claims, contact your Morse Dealer to obtain a 

return authorization number, and for return freight advice. Return 

freight must be prepaid.

In all instances, liability is limited to the purchase price paid or to 

repairing or replacing the product. Customer assumes liability for 

any modifications, unauthorized repairs or parts substitution.

Safety Information

While Morse Manufacturing Co. drum handling equipment is 

engineered for safety and efficiency, a high degree of responsibility 

must be placed upon the machine operator to follow safe practices, 

based primarily on common sense, upon which true safety 

depends.

Failure to follow the safety precautions in this manual can result in 

personal injury or property damage. Observe the same precautions 

as with similar machinery where carelessness in operating or 

maintenance is hazardous to personnel. Carefully read the safety 

precautions below and throughout this manual.

Review the Material Safety Data Sheet(s) for the material(s) in 

the drum(s) and take all necessary precautions. Safety shoes, 

work gloves, hard hat and other personal protective devices are 

recommended.

Prior to initial use, inspect all moving parts. Inspect saddle 

assembly for proper operation. Perform necessary load test, 

inspections, operator training, etc.

COntentS

Page

Receiving Procedures. . . . . . . . . . . . . . . . . . . .   1
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1
Safety Information. . . . . . . . . . . . . . . . . . . . .   1 - 2
Machine  Description.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .      3
Installation  Instructions.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .    3
Controls.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .    4
Operating Instructions. . . . . . . . . . . . . . . . . . . .     5 
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . .   5
Parts Lists and Diagrams. . . . . . . . . . . . . . . . . .   6 - 7

service@morsedrum.com

103 Kuhn Rd.

Syracuse, NY, 13208 USA

morsedrum.com

(315) 437-8475

Summary of Contents for 82AM








Reviews: