background image

The Specialist In Drum Handling Equipment

Model 86

Drum Lifter

CONTENTS

Page

Receiving Procedures. . . . . . . . . . . . . . . . . . . .   1
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1
Safety Information. . . . . . . . . . . . . . . . . . . . .   1 - 2
Machine  Description.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .      3
Operating Instructions. . . . . . . . . . . . . . .. . . . .     3
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . .   3
Parts  List  and  Diagram.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .      4

Operator’s Manual 

for Morse Model 86

Drum Lifter

Serial Number 1210 to 0318 (MMYY)

MORSE Mfg. Co., Inc.        •        727 West Manlius Street        •        P.O. Box 518        •        East Syracuse, NY 13057-0518

Phone:  (315)  437-8475      •      Fax:  (315)  437-1029      •      Email: 

service@morsedrum.com

      •      Website: 

morsedrum.com

Copyright 2018  -  Morse Mfg. Co., Inc. 

 

Form PL86 (1210-0318)   

(Updated 2 Mar, 2018 2:05 PM)

   

1

Receiving Procedures

Every Morse drum handler is inspected prior to shipping. However, 

damage may be incurred during transit.

Check for visible damage. If you choose to accept damaged 

• 

freight, always sign noting the damage on the 

Bill of 

Lading

Document the damage and have the truck driver sign. We 

• 

recommend keeping a digital camera at your receiving dock 

for this purpose. 

Open packages expeditiously to check the condition of the 

• 

goods. There is only a 24 hour window to notify the carrier 

of any concealed damage. 

Immediately 

• 

report all damage to the shipping company!

 

Then you may contact Morse for assistance with your 

freight claim. 

Morse Manufacturing will not be held responsible for any 

• 

damaged freight that is not signed for as damaged.

Limited 2 Year Warranty

Morse drum handling equipment is guaranteed against defects in 

workmanship or materials for two years when used properly within 

its rated capacity. Warranty does not cover wear from normal use 

or damage from accident or abuse. Motors and other purchased 

parts carry the warranties of their manufacturers.

For warranty claims, contact your Morse Dealer to obtain a 

return authorization number, and for return freight advice. Return 

freight must be prepaid.

In all instances, liability is limited to the purchase price paid or to 

repairing or replacing the product. Customer assumes liability for 

any modifications, unauthorized repairs or parts substitution.

Safety Information

While Morse Manufacturing Co. drum handling equipment is 

engineered for safety and efficiency, a high degree of responsibility 

must be placed upon the machine operator to follow safe practices, 

based primarily on common sense, upon which true safety 

depends.

Failure to follow the safety precautions in this manual can result in 

personal injury or property damage. Observe the same precautions 

as with similar machinery where carelessness in operating or 

maintenance is hazardous to personnel. Carefully read the safety 

precautions below and throughout this manual.

Review the Material Safety Data Sheet(s) for the material(s) in 

the drum(s) and take all necessary precautions. Safety shoes, 

work gloves, hard hat and other personal protective devices are 

recommended.

Prior to initial use, inspect all moving parts. Perform necessary 

load test, inspections, operator training, etc.

Summary of Contents for 86

Page 1: ...um handling equipment is guaranteed against defects in workmanship or materials for two years when used properly within its rated capacity Warranty does not cover wear from normal use or damage from accident or abuse Motors and other purchased parts carry the warranties of their manufacturers For warranty claims contact your Morse Dealer to obtain a return authorization number and for return freig...

Page 2: ...dle any other type of drum or object WARNING DO NOT exceed the weight capacity of 1000 Lb 454 kg WARNING DO NOT operate damaged or malfunctioning unit or a unit with missing parts WARNING DO NOT lift people or suspend loads over people Stay clear of suspended loads WARNING DO NOT lift loads higher than necessary WARNING DO NOT leave suspended loads unattended WARNING DO NOT remove or obscure warni...

Page 3: ...ce which is covered by the American National 5 Standard ASME B30 20 The user should comply with all aspects of this standard Unit has been factory load tested and furnished with a load test certificate Assembly Instructions Remove top carriage bolt item 13 and lock nut item 12 on each side Loosen bottom lock nut one turn 1 Swing frame weldment item 1 to vertical position and replace top carriage b...

Page 4: ... 1 1 3668 P TOP SECTION KD 86 2 1 4079 P HHCS M8 X 60 MM CL8 8 8MM 3 1 4081 P NUT M8 ESNA 8MM 4 1 5017 P CHAIN CINCH 9 32 38 LINK 5 1 727A P RATCHET PLATE CPT W TAB 1 4 6 1 1296 P HHCS 1 4 20 X 7 1 2 GR5 7 1 1297 P NUT 1 4 20 REV HEX LOCK 8 1 168 P PAWL WITH DRILLED HOLE 9 1 169 P SPRING PAWL 10 1 170 P SCREW 3 8 DIA X 5 8 SHOULDER 11 1 3681 P BOTTOM SECTION KD 86 12 4 810 P NUT 1 2 13 REV HEX LOC...

Reviews: