background image

Important: Retain these instructions for future use.

  Powerful 11MJ/h stainless steel burner with rotary 

ignition for easy lighting

  Satin enamel cast iron cooking surface – ½ grill and ½ 

hotplate – easy to cook on and wash up

  Durable die cast aluminium bowl and hood
  Integrated temperature  gauge for maximum control 

when cooking

  Convenient side shelves for easy food preparation and 

cooking

  High dome hood – 17cms – allows you to cook roasts 

easily

  Stand available as an optional extra (sold separately)
  Supplied with hose and regulator so it’s ready to use 

with a POL gas cylinder

  Gas certified to Australian Standards

 

 

PORTABLE GAS BBQ

03397 03/16

Gasmate® is a registered trademark of:  Sitro Group Australia Pty Ltd  www.gasmate.com.au

 

 

 

               

       Aber Holdings Ltd - Hamilton, N.Z.  www.gasmate.co.nz

MORSØ FORNO GAS 

Certificate No: 8613-01 

Powerful 12MJ/H stainless steel double 
ring burners

Gas Certified to Australian/New Zealand standards

Satin enamel cast iron cooking Grill 
– Easy to cook on and wash up

Convenient sure fire Electronic ignition 
– Battery not included

Summary of Contents for FORNO SQ-330













Reviews: