background image

IMPORTANT! 

The installation instructions contained in this 

manual should only be carried out by a qualified technician.

INST

ALLA

TION

/

USER MANU

AL

back

Table of Contents

1.0

General Warnings

2.0

Hardware Kit Contents

3.0

Tools Required

4.0

Prior to Installation- Important! 

5.0

Matrx Mini Installation

6.0

Disengaging the Matrx Mini

7.0

Care and Maintenance Instructions

8.0

One-Hand Cord Release Mechanism (Optional)

9.0

Lumbar Support (Optional)

S

AFETY

S

YMBOLS

:

Proper set-up and safe use of your Invacare Matrx Mini Back depends on your
own good judgement and common sense, as well as that of your provider,
caregiver and/or health professional.  The following symbols are used
throughout this manual to identify warnings, cautions and important notes.  It
is very important that you read and understand them completely.  

CAUTION!

Failure to heed the cautions in this manual may result

in damage to your Matrx Seating product.

WARNING! 

Failure to heed the warnings in this manual may result

in personal injury.

IMPORTANT!

Important information to remember during installation

and set-up of you Matrx Seating product.

IMPORTANT!

Please refer to the Wheelchair Owners/Operators

Manual for additional safety information, warnings and cautions related to
the operation of your wheelchair.

2

Summary of Contents for Invacare Matrx Mini back

















Reviews: