background image

English

m

XiR Series Digital 

Mobile Radios

Quick Reference Card

NOTE

: Refer to User Guide for more details on 

your radio's operations/features.

Radio Controls

Record your radio’s programmable button 
functions in the blanks provided. 

SP

 represents 

Short Press, 

LP

 represents Long Press.

Display Icons

The following are the icons that appear on the 
radio’s display.

LED Indicators

Blinking red

 – Radio is receiving an Emergency 

transmission or has failed the self-test upon 
powering up.

Solid yellow

 – Radio is receiving a request for a 

Private Call, or monitoring a channel.

Blinking yellow

 – Radio is scanning for activity 

or receiving a Call Alert.

Double blinking yellow

 – Radio is no longer 

connected to the repeater while in Capacity Plus, 
all Capacity Plus channels are currently busy or 
in locked state. 

Rapidly blinking yellow

 – Radio is searching for 

a new site. 

Solid green

 – Radio is transmitting.

Blinking green

 – Radio is powering up, 

receiving a non-privacy-enabled call or data, or 
detecting activity over the air.

Rapidly blinking green

 – Radio is receiving a 

privacy-enabled call or data. 

For Capacity Plus, there is no LED indication 
when the radio is detecting activity over the air.

On/Off Button

CH+

CH -

P 1

P 2

1

2

4

3

9

5

6

8

7

1

Volume Knob

Display

Channel Rocker

Speaker

Front Button P2 (Programmable)

SP

: _____________ 

LP

: _____________

Front Button P1 (Programmable)

SP

: _____________ 

LP

: _____________

Accessory Connector

LED Indicators

Indicates a Private Call in progress.

 

In the absence of a repeater, radio is 
currently configured for direct radio to 
radio communication.

*

Scan feature is activated.

*

*

 Not applicable in Capacity Plus

2

3

4

5

6

7

8

9

*6871436M01*

6871436M01-J

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used 
under license. All other trademarks are the property of their respective owners.
© 2007 – 2011 Motorola Solutions, Inc. All Rights Reserved. 02/11
Motorola Technology Sdn. Bhd. (Co. No. 455657-H),
Plot 2, Bayan Lepas Technoplex Industrial Park, Mukim 12, S.W.D., 11900 Penang, Malaysia. Printed in Malaysia.

Summary of Contents for 6871436M01-J

Page 1: ...acy enabled call or data or detecting activity over the air Rapidly blinking green Radio is receiving a privacy enabled call or data For Capacity Plus there is no LED indication when the radio is detecting activity over the air On Off Button CH CH P1 P2 1 2 4 3 9 5 6 8 7 1 Volume Knob Display Channel Rocker Speaker Front Button P2 Programmable SP _____________ LP _____________ Front Button P1 Prog...

Page 2: ...io enters into locked state A tone sounds and the yellow LED double blinks Your radio enters into locked state for 15 minutes and responds to inputs from On Off button NOTE The radio is unable to receive any call including emergency calls in locked state The use of Emergency footswitch cancels out password input to access the radio Selecting a Zone 1 Press the programmed Zone button 2 You hear a p...

Page 3: ...nly target radios with the same Privacy Key OR the same Key Value and Key ID as your radio will be able to unscramble the transmission Making a Phone Call NOTE When you attempt to make or end a Phone Call without the access and deaccess codes preconfigured the attempt fails and a negative indicator tone sounds 1 Press the programmed One Touch Access button to make a Phone Call to the predefined ID...

Page 4: ...een LED lights up 3 When an Emergency Alarm acknowledgment is received the Emergency tone sounds The green LED blinks OR If your radio does not receive an Emergency Alarm acknowledgement and after all retries have been exhausted a low pitch tone sounds 4 Radio exits the Emergency Alarm mode If your radio is set to Silent it will not display any audio or visual indicators during Emergency mode Priv...

Reviews: