Overview of the standby screen
Overview of the handset
Getting started
The CD2HD handset is designed to be used with a CAT-iq 2.0
base station or router. If registered to a GAP or CAT-iq 1.0 base
you will be able to make and receive external calls and have
access to the local contacts.
HD Voice technology has revolutionised the telephone industry.
Callers can now feel better connected. The rich quality of HD
Voice calls is more effective and offers a superior listening
experience.
After a few quick steps you can be making and receiving calls
on your CD2HD handset. Please ensure that your router has the
latest software update installed before registering a new handset.
Registering a handset to a FRITZ!Box requires FritzOS 6.80 or
later installed on the FRITZ!Box before registering the handset.
Refer to the router or FRITZ!Box manual for details of how to
perform a check and install the latest software if required.
CD2HD
handset
CD2HD
charger
Mains power
adaptor for
the charger
Batteries
What’s in the box
Extended
Quick Start
Guide
Make sure the router is
plugged into the power and
working correctly.
Plug in the router
2
Insert the batteries
Important
Warning! Use only the approved rechargeable Ni-MH battery cells
(2 x AAA Ni-MH 750mAh rechargeable batteries) supplied with
your CD2HD.
Plug the power adaptor into
the socket marked
on the
rear of the charger and plug
the other end into the mains
power wall socket. Switch on
the mains power.
We recommend leaving the
handset to charge for 30
minutes before proceeding to
the next step.
To fully charge the batteries,
place the handset on the
charger to charge for at least
16 hours continuously.
Connecting and charging the handset
Battery low warning
If you hear a warning beep every 60 seconds during a call, you
will need to recharge the handset before you can use it again.
When charging, will scroll on the display.
Left softkey
Menu
OK
Talk
Hands-free
Scroll down
Volume down
Call list
Change case
Temporarily
change from
pulse to tone
dialling
Ringer off
Scroll left
Contacts
Recall key
Right softkey
Clear
Back
Intercom
Scroll up
Volume up
End call
Power on/off
Exit
Scroll right
Redial
#
Keypad lock
Microphone
Ring
Indicator
LED
Display
Speed dial keys
*
Space
Pause
Status bar
Handset
name
Left soft key
information
Right soft key
information
Date and
time
Signal icon
Displays when in
hands-free mode
Mute is activated
Ringer is switched off
Indicates a missed call
Alarm is set
Battery indicator
Navigating the menu
From the standby screen, press
Menu
.
The main menu is opened and the display will show the main
menu icons.
Use the
u
/
d
/
B
(
t
) /
r
(
u
) keys to scroll through the menu.
Left softkey - press to action the corresponding word prompt
shown in the lower left corner of the display.
Right softkey - press to action the corresponding word prompt in
the lower right corner of the display.
Press
O
to return to standby.
Status bar icons
Main menu icons
Contacts
Call List
Clock & Alarm
Call Settings
Handset Settings
Advance Settings
1
Slide
2
Press down
Remove the battery cover from
the back of the handset and
insert the rechargeable Ni-MH
battery cells supplied. Please
note the ’+’ and ’-’ markings
inside the battery compartment
and insert in the correct direction.
Slide the battery cover back
into place.
Select the required language
The routers registration
process is dependent on the
router, follow the registration
instructions given in your
routers user guide.
Registering the handset
Hold your CD2HD handset
within 5m of the router.
Press
Register
. The screen
displays
Registering
. Once
successful
Registered
will be
displayed and the handset
will beep and the standby
screen will be displayed.
Once the battery is charged
the list of available languages
is displayed.
Scroll
u
/
d
to the required
language and press
Select
to
save.
Compatible
with CAT-iq
Routers
A
VM
FR
IT
Z
!
(C
A
T-
iq
2.0
Mod
e)
an
d
TP
-
Li
nk
Ro
ut
er
s
fo
r
co
rd
l
e
ss
han
dsets.
Motorola CD2HD
HD Voice Cordless
Handset for Routers
Extended Quick Start Guide
A new dimension in
voice
