SHAW HDPVR
INSTALLATION INSTRUCTIONS
(Approx. Hardware Setup Time: 10-15 Minutes)
STEP 1
|
DO YOU HAVE EVERYTHING?
The following components are included in the package that your HDPVR came in:
Cable Cord (Coax)
Power Cord
HDMI Cable
IR Re Tether Cord
(Optional Use)
Shaw Universal Remote
Motorola DCX 3400-M HDPVR
STEP 2
|
TIME TO HOOK UP YOUR NEW HARDWARE.
B. Find a location to put your new hardware that will allow
it to breathe.
C. Screw one end of the
included white cable cord
(with silver ends) in to your
wall cable outlet and the
other end in to CABLE IN
on the back of the HDPVR.
For an optimal viewing
experience, we recommend
using the included cable
cord instead of any others
that you might have around.
A. Your serial number, “Host SN,” is located on the back
of the HDPVR (next to the number 3) and starts with
the letter “M”. Alternatively, you can fi nd the serial
number on the white sticker labeled “S/N” on the
HDPVR packaging.
Before you hook up your HDPVR, write your serial
number and account number below. You will need it
when you contact us to activate your new hardware.
Wall Outlet
Cable In
Cable Out
Serial Number:
Account Number:
