•
Microprocessor-Controlled
Active Infrared
•
Digital Circuit Design
•
Wireless Transmitter Features
ClearPath™ Technology With
Three User-selectable Frequency
Settings (300 MHz, 390 MHz,
HDRC™)
• FCC Licenses For All Three
Frequency Settings
• SignalLock™ Guarantees Signal
Transmission When Presence
Is Detected
• Integrated Signal Radiating
Antenna Boosts Signal Strength
• Compatible With Most 300 MHz,
390 MHz, and ClearPath™
CP/TX Receivers
The 216TX Series wireless
touchless switches are infrared
devices designed to activate full
and low energy automatic doors.
The built-in wireless transmitter
offers the added benefit of easy
installation, requiring no wiring
to the switch.
The hands free operation of the
216TX makes them ideal for ADA
applications and locations where
hygiene is important such as
restrooms, health care facilities
or cleanrooms. The 216TX is
microprocessor controlled,
allowing for superior operation in
a smaller unit.
The 216TX has a 4 1/2”
stainless steel faceplate and
comes installed in the 1020 box
complete with a transmitter.
Product Name
216TX Series
Infrared Wireless Touchless Door
Activator Switches
Contact Information
MS SEDCO
7898 Zionsville Road
Indianapolis, IN 46268
Phone: (317) 842-2545
www.mssedco.com
Product Description
BASIC USE
Technical Data
•
ADA Compliant Hands-Free,
Germ-Free Operation
SPECIFICATIONS
Detection Method
Amplitude modulated, coded
carrier active infrared
Avg. Radiated Power
Less than
5 mW/cm²
Input Voltage
216: 3.3 Volts DC Coin Cell
Battery (CR2032)
TX: 9 Volt DC Battery
216TX Series
Infrared Wireless Touchless
Door Activator Switches
Temperature
-4°F to 140°F (-20°C to 60°C)
Face Plate Finishes
Standard: Brushed Stainless Steel
F
or Special Finishes & Legends,
Contact Factory
Face Plate Sizes
4 1/2” square
Operating Distance
±1 - 5 inches
Unit Size
4 3/4”W x 4 3/4”H x 2 1/4”D
Mounting Options
Includes wall mount box
072017
216TX-TG
Response Time
<300 mSeconds
APPLICABLE
STANDARDS
American National Standards
Institute (ANSI) - Building
Hardware
Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19.
Installation
Refer to MS SEDCO Installation
Instructions.
Availability & Cost
AV
AILABILI
TY
Available internationally from
manufacturer's
authorized
distributors; contact MS SEDCO
for the location of the nearest
distributor.
COST
Cost information on MS SEDCO
products is available from the
manufacturer's
authorized
distributors.
Warranty
A one year warranty is available
from the manufacturer covering
defects
in
materials
and
wor
kmanship.
Contact MS SEDCO
for details.
Maintenance
MS SEDCO recommends that all
maintenance and adjustments be
performed by an AAADM Certified
Technician.
Technical Services
MS SEDCO's staff of factory
trained sales and service
personnel offer design assistance
and technical support.
Loca
l
distributors are also available to
assist in selecting appropriate
devices for specific uses and to
provide onsite installation
7898 Zionsville Road Indianapolis, Indiana 46268 Telephone: (317) 842-2545 Fax: (317) 849-3387
www.mssedco.com custsvc@mssedco.com
