MTD 19A70054 Series, Operator'S Manual

Safe Operations Practices • Contents of Carton • Assembly & Installation • Operation

O

peratOr

’

s

 M

anual

Record Product Information

Before setting up and operating your new equipment, please locate the model plate 
and record the information in the area provided to the right. You can locate the 
model plate by looking on the outside of the bagger cover. The model plate contains 
the unit’s model and serial numbers. This information will be necessary, should you 
seek technical support via our web site, Customer Support Department, or with a 
local authorized service dealer.

M

odel

 N

uMber

S

erial

 N

uMber

Form No. 769-21372A

(August 30, 2019)

WARNING

Read and follow all safety rules and instructions in this manual before attempting to operate this machine. Failure to comply with these instructions 

may result in personal injury.

Twin Rear Bagger

Model Nos. 19A70054* and 19A70055*

Safe Operations Practices ......................................................... 2
Contents of Carton ................................................................... 4
Assembly & Installation ........................................................... 6
Operation ............................................................................... 9

Warranty .............................................................................. 10
Español ..................................................................................11
Fran

ç

ais .................................................................................21

Table of Contents

NOTE:

This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ 

from yours.

WARNING

California Proposition 65 

Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth 

defects.