Introduction
The MTN F@stLink USB Stick is a multi-mode USB modem, working in HSUPA/HSPA+/WCDMA/
EDGE/GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it
integrates the functionality of a modem and a mobile phone (SMS), and combines mobile
communication with Internet perfectly. It supports data and SMS services through the mobile
phone network, enabling you to communicate anytime and anywhere.
Specification
The following table shows the specification of your device.
Interface Type
USB 2.0 HIGH SPEED
Systems supported
Supports most types of laptop and desktop PC.
Operating systems supported
Windows XP(32bit), Windows Vista(32bit/64bit), Windows 7
(32bit/64bit), Windows 8(32bit/64bit) MAC 10.5,10.6,10.7,10.8
Ubuntu(32bit) 12.10
，
12.04
，
11.10, Fedora(32bit) 18
，
17
，
16
Network Standards
HSUPA/HSPA+/WCDMA/EDGE/GPRS/GSM
Transmission speed (Max)
HSUPA: 5.76Mbps UL
HSPA+: 21.6Mbps DL
Temperature
Storage: -20°C ~ +70°C
Operation:-10°C ~ +60°C
Dimension
88.5mm × 27.2mm × 10.5mm
microSD capability
Support up to 32GB microSD card
Hardware Installation
1. Press and push the front cover and remove it.
Notes:
Do not open the front cover rudely so as to avoid the damage of the front cover.
2. Insert the SIM/USIM card into the SIM/USIM card slot.
Insert the SIM/USIM card with the metal contact area facing downwards into the slot, and then
push SIM/USIM card as far as possible, shown as the following picture.
3. Insert the microSD card into the microSD card slot.
Notes:This stick only supports microSD card.
Insert your microSD card into the microSD card slot, shown as the follow-
ing picture.
4. Put the front cover flatly upon the body of modem and push the front cover
5. Connect the Stick to your laptop or desktop PC.
Plug the USB connector into your computer’s USB port and make sure that
Notes: microSD
is a trademark
of SD Card Association.
Getting to know your device
The following figure shows the appearance
of the MF667. It is only for your reference.
The actual product may be different.
1. USB Connector
2. SIM/USIM card slot
3. Indicator
4. microSD card slot
5. Front Cover
6. Stick Cap
SMS service, Data service, Applications management,
support microSD card, etc.
Functions
it is tightly inserted.
The OS automatically detects and recognizes
new hardware and starts the installation wizard.
MTN F@stLink MF667 HSPA USB Stick
Quick User Guide
to lock the cover in its place.
