AUTO RANGING
POCKET-SIZED
DIGITAL MULTIMETER
OPERATOR’S
INSTRUCTION MANUAL
SAFETY INFORMATION
This meter has been designed according to IEC-1010 concerning
Electronic measuring instruments with an overvoltage category (CAT II) and
pollution2.
Follow all safety and operating instructions to ensure the meter is used
Safely and is kept in good condition.
With proper use and care, your digital multimeter will give you years of
satisfactory service.
DURING USE
•
Never exceed the protection limit indicated in the specifications for
each range of measurement.
•
Never use the meter to measure voltages that might exceed 600V above
earth ground in category installations.
•
Always be careful when working with voltages above 60V dc or 30V ac
rms. keep fingers behind the probe barriers while measuring.
•
Do not perform resistance measurements on live circuits.
•
Inspect test leads and probes for cracks, breaks or crazes in the
insulation before using the meter.
SAFETY SYMBOLS
Important safety information, refer to the instruction manual.
