© MuxLab Inc.
Specifications
Environment
Line level unbalanced analogue audio
Devices
DVD, VCR, camcorders, audio mixers, audio matrix switchers,
audio splitters, audio distribution amplifiers, boosters, satellite
receivers, MPEG players, laptops, stereo audio amplifiers, audio
switchers, integrated TV monitors and other line level audio
equipment
Transmission
Transparent to the user.
Bandwidth (3dB point)
(400 O source & 50 kO
receiver)
Up to 1,000 ft (305m): 60Hz - 20 kHz
1,000 ft (305m) to 5,000 ft (1.5 km): 100Hz - 20 kHz
Maximum Input Level
1.1Vp-p
Insertion Loss per Balun Pair
Less than 1 dB per pair over the frequency range
Common Mode Rejection
(CMMR)
Greater than 60 dB @ 1 kHz
Audio Source Impedance
Less than 600 ohms
Audio Receiver Impedance
10 k ohms or greater
Impedance Transformation
Ratio
Single unit: 4:1 (source: line)
Cable – UTP
24 gauge or lower solid copper twisted pair wire impedance: 100
ohms at 1 MHz. Maximum capacitance: 20 pf/foot.
Attenuation: 6.6 dB/1000 ft at 1 MHz
Max. Distance – Cat 5 UTP
5,000 ft (1,525m)
Connectors
Two (2) RCA-M 6” cable leads
One (1) RJ45
Pin Configuration (RJ45)
Audio 1 (Left): pins 1[R] & 2 [T]
Audio 2 (Right): pins 3 [R] & 6 [T]
Temperature
Operating: 0º to 55º C. Storage:-20º to 85º C. Humidity: up to 95%
Enclosure
ABS. Fire retardant plastic
Dimensions
1.875” x 1.0” diameter plus 6” audio lead
Weight
1.0 oz (28 gms).
Warranty
Lifetime
Order Information
500030
Stereo PC-Audio Balun
Tel.: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: videoease@muxlab.com URL:
www.muxlab.com
94-000638-A SE-000638-A
Stereo PC-Audio Balun (500030)
Quick Installation Guide
Introduction
The VideoEase Stereo PC-Audio Balun (500030) allows unbalanced line level stereo
audio to be transmitted up to 5,000 ft (1.5km) via unshielded copper twisted pair (UTP)
in a point-to-point connection. The product is designed for mid-range audio applications.
Used in pairs, the Stereo PC-Audio Balun eliminates costly and bulky audio cable,
allowing audio equipment to be connected or moved within a structured cabling
environment. The 500030 also works in conjunction with other MuxLab audio-video
products including the 500001, 500012, 500019, 500027 and 500200 for a more
complete cabling solution. Applications include; audio distribution, custom residential
systems and intercom systems.
Installation
To install the Stereo PC-Audio Baluns, perform the following steps:
1.
One Stereo PC-Audio Balun is required for the PC stereo output.
2.
Identify the pin configuration of the baluns. Two (2) twisted pairs are required
as shown in the following diagram.
