© MuxLab Inc.
94-000783-A SE-000783-A
2321 Rue Cohen, Montreal, Quebec, Canada. H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail:
Specifications
Environment
HDMI 1.3a (Supports the 3D feature of HDMI 1.4)
Devices
DVD, plasma, projectors, monitors, TV, PC, laptops, servers
supporting HDMI.
Transmission
Transparent to the user
Bandwidth
340 MHz
Signals
HDMI 1.3a protocol
Connectors
One (1) HDMI receptacle.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
One (1) RJ45S for LAN (10/100BaseT) connection.
One (1) three position terminal block for RS-232
Two (2) 3.5mm jacks for IR emitter and sensor.
Note: HDMI cables not included.
Maximum Distance
Based on a maximum
length of 6.6 ft (2 m) of
HDMI cable per end.
480i/p:
Cat 5e/6: 330 ft (100 m)
720p, 1080i:
Cat 5e/6: 330 ft (100 m)
1080p:
Cat 5e/6: 330 ft (100 m)
1080p Deep Color:
Cat 5e/6: 330 ft (100 m)
4K @ 24, 25, 30 Hz: Cat 5e/6: 230 ft (70 m)
Note: When installed in an electrically noisy environment, an STP
cable must be used. Also, cross-connection reduces the effective
distance depending on the grade of twisted cable used.
RJ45 Pin
Configuration
Reverse Polarity
Sensitive. Use EIA/TIA
568A or 586B straight-
through wiring.
RJ45 Link
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable
One (1) Cat 5e/6 or better twisted pair cables required
Power Supply
Two (2) 110-240V/5VDC power supplies with interchangeable blades
Power Consumption
Transmitter: 2.75 Watt
Receiver: 5.15 Watt
Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure
Metal
Dimensions
4.40” x 3.00” x 1.00” (11.2 x 7.6 x 2.5 cm)
Weight
1.4 lbs (0.6 kg)
Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty
2 years
Order Information
500456
HDMI 4-Play Extender Kit
500456-TX HDMI 4-Play Transmitter
HDMI 4-Play Extender Kit
500456
Quick Installation Guide
Overview
The HDMI 4-Play Extender Kit (500456) allows HDMI equipment to be connected up
to 330 ft (100 m) @ 1080p Deep Color via one (1) Cat 5e/6 unshielded twisted pair
cables in a point-to-point configuration. The product also features one LAN port for
interconnecting Ethernet equipment and a RS-232 port for control via the same Cat5e/6
cable. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR
Emitter and IR Sensor for remote control applications.
Applications
Applications include commercial and residential AV systems, classroom projector
systems, digital signage, boardroom systems, collaborative PC systems, and medical
information systems.
Installation
1.
Identify the connectors on the Transmitter and Receiver as indicated on the product labels.
2.
Verify that the distance between the HDMI Transmitter and Receiver is within MuxLab
specifications (see Specifications table).
3.
To install the Transmitter:
3a.
Connect the Transmitter to the HDMI video source with an HDMI compliant cable.
3b.
Connect one (1) lengths of Cat 5e/6 (or higher) grade UTP cables to RJ45 LINK
connectors on the Transmitter.
