© MuxLab Inc.
94-000930-A SE-000930-A
2321 Rue Cohen, Montreal, Quebec, Canada. H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail:
Specifications
Specifications
Environment
HDMI 2.0 and HDCP 2.2
Devices
Servers/Workstations/PCs, Smart Whiteboards, Monitors, TVs, and Keyboard & Mouse Devices.
Bandwidth
594MHz
Signals
HDMI 2.0
Connectors
Note: Cables not included.
Connectors per TX and RX:
One (1) HDMI receptacle.
Two (2) RJ45S for Cat 5e/6 unshielded or shielded twisted pair (for 10GbE and 1GbE ports).
Two (2) 3.5mm jacks for IR emitter, IR sensor.
One (1) 3.5mm jack for line-level 2CH Audio -In (TX) and Audio-Out (RX).
Three (3) USB 2.0 (480Mbps) Type A connectors for KVM (RX).
One (1) USB 2.0 (480Mbps) Type B connector for KVM (TX).
One (1) 3-Pin Phoenix connector for RS232 (supports up to 115.2K baud rate).
One (1) 2.1mm power jack (for DC power).
Maximum Distance
Based on a maximum length of 6.6ft
(2m) of HDMI cable per end.
Cat5e/6: 330ft (100m) up to 4K @ 60Hz
Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection
reduces the effective distance depending on the grade of twisted cable used.
Latency
Zero latency (undetectable in human terms)
Compression
Uncompressed up to 4K/60 (4:2:0), and light compression for 4K/60 (4:4:4) only
Network Bandwidth
< 10Gbps
Network Requirement
10Gig Network XFI, IEEE 802.3
IR Frequency
38 to 56KHz
RJ45 Pin Configuration
Reverse Polarity Sensitive. Use
EIA/TIA 568A or 586B straight-
through wiring.
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Pin 3 (R)
Pin 6 (T)
Pin 4 (R)
Pin 5 (T)
Pin 7 (R)
Pin 8 (T)
Cable
One (1) Cat 5e/6 or better twisted pair cables required
Power Source
Input: 100-240V/1.5A (max) @ 50-60Hz
Output: 12DC @ 3A
Includes appropriate AC multi-blades per region (US, UK and Euro)
Power Consumption
Transmitter: 16 Watts
Receiver: 16 Watts
Temperature
Operating: 0° to 40°C
Storage: -20° to 70°C
Humidity: 10% to 90% non-condensing
Unit Dimensions
7.7” x 5.2” x 1.3” (195mm x 132mm x 33mm), per unit
Packaging Shipping Weight
3.12lbs (1.42kg), per unit
Compliance
Regulatory: FCC, CE, RoHS
Warranty
3 years
Order Information
500760-TX-KVM HDMI 4K/60 KVM over IP Transmitter
500760-RX-KVM HDMI 4K/60 KVM over IP Receiver
HDMI 4K/60 KVM over IP Extender
500760-KVM
Quick Installation Guide
Overview
The HDMI 4K/60 KVM over IP Extender is based on SDVoE Technology and allows HDMI based
servers/workstations supporting up to 4K @ 60Hz resolution to be connected and extended to one
or more operators that can connect with and manage any of the servers/workstations in a KVM
application. The operator may connect a remote monitor, keyboard & mouse and powered audio
speakers to any of the servers/workstations being managed. This system also supports Smart
Whiteboard applications via the HDMI and USB ports. 100’s of servers/workstations may be
managed, depending on network bandwidth, utilizing one Receiver for each operator and one
Transmitter per server/workstation. Each Transmitter (500760-TX-KVM) and Receiver (500760-
RX-KVM) can be connected via Cat5e/6 cable up to 330ft (100m) from a 10Gig Ethernet Switch.
The HDMI 4K/60 KVM over IP Extender also supports Rs232 and 2-way IR for remote
management of end devices.
Each unit comes with a 12VDC @ 3A power supply, with multi-blades for North America, UK,
Europe and Australia, and also includes a wall mount bracket kit, and IR sensor & emitter for
remote management of end devices.
The MuxLab Pro Digital Network Controller is available to simplify centralized configuration and
control, software updates and allows for connectivity management from MuxControl and other
third party applications running on smartphones and tablets.
Applications
Applications include KVM and Smart Whiteboard applications.
Installation
1.
Identify the connectors on the Transmitter and Receiver as indicated on the product labels, see the
above front and rear product views for further details.
2.
Verify that the distance between the HDMI Transmitter and Receiver is within MuxLab
specifications (see Specifications table for more details).
3.
To install the Transmitter:
3a.
Connect the Transmitter to the HDMI server/workstation with an HDMI compliant
cable.
3b.
If the application is point-to-point, then connect one (1) length of Cat 5e/6 (or higher)
grade UTP cable to the RJ45 LINK connector on the Transmitter. If transmitting over
the network, use a 10G Ethernet Switch between Transmitter and Receiver
4.
To install the Receiver:
