NAD S100 Installation And Setup Instructions Download

Page: 1 / 4

S100

RIAA

Phono Module

Owner’s Manual

Installation and set-up instructions

The NAD S100 RIAA Phono Module is a custom designed optional phono stage for the

NAD S100 pre-amplifier.

The module offers serveral settings for Moving Magnet (MM) and Moving Coil (MC) to

accommodate a wide range of cartridges. The module is factory-set at MC; 35dB gain;

47kohm. This setting will suit most high output Moving Coil (MC) cartridges.

NOTE:

Installation and set-up of the NAD S100 RIAA Phono Module must be left to your official

NAD dealer or qualified technicians. Do not attempt to install and/or change the settings

of the module yourself.

IMPORTANT NOTICE:

NAD can not accept any responsibility or held liable for the consequences of incorrect

installation of the S100 RIAA phono module. Incorrect installation may void warranty on

both the S100 RIAA phono module and the S100 pre-amplifier.

Summary of Contents for S100

Page 1: ...B gain 47kohm This setting will suit most high output Moving Coil MC cartridges NOTE Installation and set up of the NAD S100 RIAA Phono Module must be left to your official NAD dealer or qualified tec...

Page 2: ...nel Keep the bolts in a safe place Gently remove the S100 top cover panel by first sliding the panel slightly backwards and then lifting upwards With the controls volume input buttons etc facing towar...

Page 3: ...ose indicated in the table below NOTE Never operate the S100 RIAA Module without its top cover installed By using a pair of small pliers or tweezers remove and place the jumpers for both rows in the d...

Page 4: ...WWW NADELECTRONICS COM 2002 NAD ELECTRONICS INTERNATIONAL A DIVISION OF LENBROOK INDUSTRIES LTD...