RP6
Restrictor Plate Kit
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686
• www.napoleonfireplaces.com
W415-1792 / 11.24.17
!
WARNING
• Turn off gas and electrical supply before servicing the appliance.
• Appliance may be hot, do not service until appliance is cool.
• For safe and proper operation of the appliance, follow the venting instructions exactly.
• To avoid danger of suffocation keep the packaging bag away from babies and children. Do not use in cribs, bed,
carriages, or play pens. This bag is not a toy. Knot before throwing away.
Installer:
Leave this leaflet with the appliance.
Consumer:
Retain this leaflet for future reference.
You will need:
Drill
Hex Bit
Caution:
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this appliance and shall be
installed. This barrier is not deisgned for prolonged contact.
Included in this kit:
1 x 5” Restrictor Plate
Vertical installations may display a very active flame. If this appearance is not desirable, the exhaust outlet may be restricted
with a Wolf Steel approved restrictor kit. This kit is not recommended for short vertical vent runs.
Depending on the model and/or year of your appliance, mounting holes may not exist.
A.
Secure 5” restrictor to mounting plate using 2 screws (supplied).
B.
Remove baffle by removing 1 screw from firebox. Set screw and baffle aside.
C.
Align mounting plate clearance holes (4) over existing screws protruding into firebox. For ease of access,
ensure restrictor and mounting plate are installed with screws installed in Step A facing upwards
(into exhaust collar).
D.
Install 4 self-drilling screws (supplied) (2 per side).
E.
Reinstall baffle using screw removed in step B.
note:
For ease of installation, the mounting plate was designed with 2 fixed holes and 2 slotted holes.
5” RESTRICTOR
TOP VIEW
MOUNTING
SCREWS
FIREBOX
TOP
MOUNTING
PLATE
BAFFLE
5” RESTRICTOR
TOP VIEW
1. MOST RESTRICTION
2. MODERATE RESTRICTION
3. LEAST RESTRICTION
EXHAUST COLLAR
FIREBOX TOP
#8 x ½ HEX HEAD
SHEET METAL
SCREWS
1 x Mounting Plate
6 x Mounting
Screws
