TOOLS REQUIRED:
3mm Hex Key
Phillips Screwdriver
PARTS LIST
Index Description
Qty.
1
Windshield, Hard Coated Lexan® polycarbonate 1
Bag#1103
2
Screws, M5 Nylon Black
6
INSTALLATION
Stock nylon screws or Nylon Screws (2) from
Bag#1103 may be used during installation.
1.
Remove the 2 screws holding plastic front plate to top
surface of windscreen.
Figure 1 (3mm Hex Key)
2.
Remove front plate
.
3.
Remove the 6 screws holding the stock windscreen to
the motorcycle.
(Phillips Screwdriver)
4.
Place VStream Windscreen into position on motorcycle.
Secure at all 6 locations with the stock screws or replace-
ment Screws (2). Tighten the screws firmly.
Do not over
tighten. Figure 2 (Phillips Screwdriver)
5.
Re-install front plate on outside of windscreen using
stock screws.
(3mm Hex Key)
Attention
Note:
Special notes and cautionary measures which
can prevent damage to the accessory or
motorcycle.
Tips for facilitation of operation,control and
adjustment, as well as maintenance work.
Right and left side of motorcycle is determined while
sitting on the bike.
VStream
®
Windscreen
Installation and Owner’s Manual
N20307 Sport, N20308 Mid and N20309 Tall
for FJR 1300 12~
Figure 1
Bag#1103
Figure 2
