background image

©

 1997–2002 National Instruments Corp. All rights reserved.

CVI™, LabVIEW™, Measurement Studio™, National Instruments™, NI™, ni.com™, and NI-DAQ™ are trademarks of 
National Instruments Corporation. Product and company names mentioned herein are trademarks or trade names of 
their respective companies. For patents covering National Instruments products, refer to the appropriate location: 

Help»Patents

 in your software, the 

patents.txt

 file on your CD, or 

ni.com/patents

.

October 2002

321562D-01

W

HERE

 

TO

 S

TART

 

WITH

 

THE

 NI 435

X

This document explains how to begin using the National Instruments 
4350/4351 (NI 435

X

) high-precision data acquisition (DAQ) temperature 

and voltage meters for PCMCIA, USB, PCI, and PXI/CompactPCI buses.

Conventions

The following conventions are used in this document:

»

The 

»

 symbol leads you through nested menu items and dialog box options 

to a final action. The sequence 

File»Page Setup»Options

 directs you to 

pull down the 

File

 menu, select the 

Page Setup

 item, and select 

Options

 

from the last dialog box.

The 

 symbol indicates that the following text applies only to a specific 

product, a specific operating system, or a specific software version.

This icon denotes a note, which alerts you to important information.

This icon denotes a caution, which advises you of precautions to take to 
avoid injury, data loss, or a system crash. When this symbol is marked on 
the product, refer to the 

Read Me First: Safety and Radio-Frequency 

Interference

 document, shipped with the product, for precautions to take.

bold

Bold text denotes items that you must select or click in the software, such 
as menu items and dialog box options. Bold text also denotes parameter 
names.

italic

Italic text denotes variables, emphasis, a cross reference, or an introduction 
to a key concept. This font also denotes text that is a placeholder for a word 
or value that you must supply.

monospace

Text in this font denotes text or characters that you should enter from the 
keyboard, sections of code, programming examples, and syntax examples. 
This font is also used for the proper names of disk drives, paths, directories, 

ni.com

Summary of Contents for 435 Series













Reviews: