CALIBRATION PROCEDURE
NI 9263
4-Channel, ±10 V, 16-Bit Analog Voltage Output Module
This document contains the verification and adjustment procedures for the National Instruments
9263. For more information on calibration solutions, visit
.
Contents
Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 2
Test Equipment......................................................................................................................... 3
Test Conditions......................................................................................................................... 3
Initial Setup............................................................................................................................... 3
Verification............................................................................................................................... 4
EEPROM Update ..................................................................................................................... 6
Reverification ........................................................................................................................... 7
Accuracy Under Calibration Conditions .................................................................................. 7
Worldwide Support and Services ............................................................................................. 8
Software
Calibrating the NI 9263 requires the installation of NI-DAQmx 9.6 or later on the calibration
system. You can download NI-DAQmx from
NI-DAQmx supports
LabVIEW, LabWindows
™
/CVI
™
, ANSI C, and .NET. When you install NI-DAQmx, you only
need to install support for the application software that you intend to use.
