INSTALLATION GUIDE
NI TB-2709
PXI Terminal Block for S Series Devices
This installation guide describes how to install and connect signals to the
NI TB-2709 terminal block for use with PXI-6123/6133 S Series devices.
The TB-2709 can also be used with the PXI-6122/6132 devices to access
the first four AI channels.
Introduction
The TB-2709 is a terminal block assembly consisting of nine SMB
connectors and a 14-pin I/O connector. The terminal block assembly
connects directly to the front panel of National Instruments PXI-6122,
PXI-6123, PXI-6132, and PXI-6133 devices, eliminating the need for an
external cable.
Figure 1.
TB-2709 Device View
1
Access Door to Configuration Switches
2
14-Pin I/O Connector (Digital Signals)
3
SMB Connectors (Analog Signals)
AI 0
AI 1
AI 2
AI
3
AI 4
AI 5
AI 6
AI 7
AI
S
TAR
T
TRIG
I
1
2
3
