GETTING STARTED GUIDE AND TERMINAL BLOCK
SPECIFICATIONS
PXIe-4310 and
TB-4310 (10V)/TB-4310 (600V)
8-channel, 16-bit, 400 kS/s/ch, Ch-Ch Isolated Analog Input Module
This document explains how to install, configure, and set up the PXIe-4310 module with the
TB-4310 (10V)/TB-4310 (600V) terminal block. Driver support for the PXIe-4310 was first
available in NI-DAQmx 17.1. For the list of devices supported by a specific release, refer to the
NI-DAQmx Readme
, available on the version-specific download page or installation media.
Note
The keying of this terminal block prevents it from connecting to other
modules that could be damaged by the voltage present on the terminal block.
However, you should only use these terminal blocks with their supported modules.
Caution
Do not supply hazardous voltages (>30 V
rms
/42.4 V
pk
/60 VDC) to the
terminal block without the terminal block being connected to the PXIe-4310.
Caution
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash.
Contents
Electromagnetic Compatibility Guidelines .............................................................................. 2
Safety Guidelines for Hazardous Voltages............................................................................... 3
What You Need to Get Started ................................................................................................. 3
Installation ................................................................................................................................ 4
Install the Software........................................................................................................... 4
Unpack and Install the Module......................................................................................... 4
Connect the Signals .......................................................................................................... 6
Install the Terminal Block ................................................................................................ 9
Confirm PXIe-4310 Module Recognition ........................................................................ 10
Device Self-Calibration .................................................................................................... 11
Run Test Panels ................................................................................................................ 12
