Quick Reference Guide
sbRIO-9629
Kit Contents
Screwdriver
IDC to
DSUB Cable
Thermal
Kit
Standoffs
and Screws
Documentation
Driver Media
USB Cable
50-Pin IDC Cable
Power Supply
sbRIO-9629
RMC Breakout
Board
IDC Breakout Board
©
2019 National Instruments
All rights reserved.
Information is subject to change without notice. Refer to the
NI Trademarks and Logo Guidelines
at
ni.com/trademarks
for more information on NI trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/
technology, refer to the appropriate location:
Help»Patents
in your software, the
patents.txt
file on your media, or the
National Instruments Patents Notice
at
ni.com/patents
. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer
to the
Export Compliance Information
at
ni.com/legal/export-compliance
for the NI global trade compliance policy and how to obtain relevant HTS codes,
ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN
AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject
to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.
For a complete list of resources go to the following URL:
ni.com/r/sbrio
377898A-03 Nov19
Connect to the Host Computer via Ethernet
1. Power on the host computer.
2. Connect the sbRIO-9629 to the host computer using a standard Category 5
(CAT-5) or better shielded, twisted-pair Ethernet cable.
Connect to Power
1. Ensure that your power supply is powered off.
2. Insert the power connector plug into the power connector receptacle of
the sbRIO-9629 until the connector latches into place.
3. Turn on the power supply.
Connect to the Host Computer via USB
1. Power on the host computer.
2. Connect the USB Type-C 2.0 device port of the sbRIO-9629 to the
host computer using a Type-C to Type-A USB cable.
OR
