INSTALLATION INSTRUCTIONS
DIN160 Cable
This guide describes how to connect and use the National Instruments DIN160 cable, which has a
maximum voltage rating of 150 V, CAT I. Use this cable to connect the NI PXI-2510 switch module to
your application.
The DIN160 cable is available in three configurations:
•
SH160DIN-3XDB50F
•
SH160DIN-160DIN
•
SH160DIN-BARE WIRE
Contents
What You Need to Get Started ............................................................................................................ 1
Getting Started with the DIN160 Cable............................................................................................... 2
SH160DIN-3XDB50F Cable ....................................................................................................... 5
SH160DIN-160DIN Cable .......................................................................................................... 12
SH160DIN-BARE WIRE Cable.................................................................................................. 17
What You Need to Get Started
To use the cable, you need the following items:
❑
DIN160 cable
❑
(Optional) Three NI TBX-50 screw terminal blocks for use with the SH160DIN-3XDB50F
❑
NI PXI-2510 switch module and documentation
̭͈Ρ΅νιϋΠ͉ͅȂུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ
