www.NationalRamp.com • 877 748 5588
REVISION: 06/21
JOURNEY SERIES
™
ALUMINUM THRESHOLD RAMP
INSTRUCTIONS AND WARNINGS
Thank you for purchasing a Journey Series™ Threshold Ramp from National Ramp!
Please read the following instructions completely before use.
To keep the ramp stable and prevent it from dislocating, you must secure the
threshold ramp to the home.
ADJUSTABLE LEG HEIGHT
1. Align the threshold against the door. Check that the TTP properly fits at the door and
confirm its placement before snapping into place.
2. If the adjustable leg needs to be cut to achieve the correct height, place the nut past the
cut mark. After cutting, remove nut to rethread bolt.
3. Affix the threshold ramp to the home by screwing down the TTP with low-profile screws
appropriate for the material of the home. If the TTP is not being used, a 90° bracket can
be used to connect the threshold to the home.
The TTP cannot be repositioned and must be cut to be removed once
installed to the threshold ramp.
A
A
B
B
C
C
D
D
E
E
F
F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
