OPI-A 2-3-2009
Rev 1.1 Mark Ryan
100 NW 11
TH
Street, Boca Raton, FL 33432
Tel. 561-955-9770 Fax. 561-955-9760
info@nav-tv.com
OPI-A
Adds iPod integration to factory radio for the 2005 and Up in the Q-7, A-8, A-6 (including RS6 & S6), and
2009 A-4 (RS & S)
What’s in the box
Package Contents
1. OPI-A Interface module
2. Interface power cable
3. iPod
cable
4. Optical
cable
5. Optical Bypass (for extending optical cable if
needed)
6.
ave the “A” connector side of the
cable accessible to the passenger side of the
vehicle cabin, but hidden from view).
USB cable (h
Installation
Tool Image
1. Open glove box and using European keys remove
the CD changer in the glove box.
2. Disconnect all wiring harness from CD changer.
Note:
The factory CD changer must be
disconnected. The OPI-A emulates a CD changer.
3. Connect fiber optic cables to the interface and
connect the yellow wire from the Molex connector
to co12volts and the black wire to vehicle
ground. Plug in Molex connector into interface.
Note:
use the factory CD changer harness for
tapping power and ground.
4. Connect the iPod cable to the interface.
5. Connect the USB cable to the interface.
Note:
After plugging in the iPod to the iPod cable,
secure the iPod in some fashion to keep it from being
damaged.
European radio removal keys.
1 |
P a g e
