5
6
1
7
Updates
Please follow the instructions below in
order to update your Navirad E-lite.
1. Go to www.gpsnavirad.com and click on
Navirad E-lite download section.
2. Download the User Tool installation
package on the web page, once installed
please restart your computer.
3. Once your computer has restarted
please connect you’re USB cable to the
Navirad E-lite then to the computer and
switch on the Navirad Elite.
4. Open the Navirad User Tool. (You should
now have an icon for this on your desktop
however if you do not, please access this
through your all programmes list in your
start menu)
5. Wait for your unit to automatically
connect.
6. Click DB upgrades make sure the
automatic box is ticked and click upgrade.
The update will now commence.
7. The unit will give a chime when
completed. Please now remove from
computer and install back into car.
Information
If you require any technical assistance
please contact us either via email:
support@gpsnavirad.com, telephone:
330123456789
Warranty & Safety
information
A 1 Year Warranty is provided with this
product. Full warranty details are
provided on request.
Do not under any circumstances attempt
to open, disassemble or repair the unit.
The manufacturer will void the warranty
in the case of failure to observe these
instructions. The manufacturer is also
not liable for the speed camera detector
failing to warn the driver of mobile speed
cameras and/or fixed cameras.
Navirad- Welcome
Thank you for purchasing the Navirad
E-Lite.
Please read this manual before use:
The object of the GPS Navirad is to
reinforce your safety on the road. We
decline all responsibility in the case of
failure to observe road safety
regulations or basic due care and
attention .
Please follow the next steps to get
your unit running and updated.
