How to Reboot or Power Down an NEC Nitsuko
Please follow the guide below for instructions on how to reboot
32i, 96i & 96+ System.
Power Switch
The power switch is located on the left
one is for the main system and the other is in case a battery backup unit has been fitted.
The 96i & 96+ System can support up to 3 cabinets.
cabinet. If you have more than one cabinet, they must be turned off and then on again in a
certain order. Please see below images of what the systems will look like if it is a standalone
cabinet or if there is 1 expansion cabinet or 2
Power switches are located in the bottom left hand corner on all cabinets.
Power Switches
Single Cabinet System
How to Reboot or Power Down an NEC Nitsuko 32i, 96i & 96+
Please follow the guide below for instructions on how to reboot or power down
located on the left hand side of the unit. There are two power switches,
one is for the main system and the other is in case a battery backup unit has been fitted.
96i & 96+ System can support up to 3 cabinets. The 32i System only supports 1 standalone
ve more than one cabinet, they must be turned off and then on again in a
certain order. Please see below images of what the systems will look like if it is a standalone
cabinet or if there is 1 expansion cabinet or 2 expansion cabinets.
located in the bottom left hand corner on all cabinets.
Single Cabinet System
Two Cabinet System
Three Cabinet System
System
or power down an NEC Nitsuko
There are two power switches,
one is for the main system and the other is in case a battery backup unit has been fitted.
The 32i System only supports 1 standalone
ve more than one cabinet, they must be turned off and then on again in a
certain order. Please see below images of what the systems will look like if it is a standalone
located in the bottom left hand corner on all cabinets.
Cabinet System
