background image

ISSUED: 04-11-06  SHEET #: 055-9458-6  09-25-09

Visit the Peerless Web Site at www.peerlessmounts.com

1 of 9

For customer care call 1-800-729-0307 or 708-865-8870.

NEC DISPLAY SOLUTIONS OF AMERICA, INC.

 Read instruction sheet before you start installation and assembly.

Maximum Load Capacity: 50 lb (22.7 kg)

IMPORTANT! Be sure not to touch the projector while tightening the set screw on the
ball and socket mount. This may cause the image to be unaligned when you let go.

IMPORTANT!  Turn to the appropriate page for your ceiling installation.

• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and

components.

WARNING

Model:  NP01UCM

Installation and Assembly - Universal
Ceiling Mount

Table of Contents

Parts List .............................................................................................................................................................................. 2

To Wood Joist Finished Ceilings, Exposed Wood Joists or Wood Beam Ceilings ................................................................ 4

To Concrete Ceilings ............................................................................................................................................................. 5

Flush Mount .......................................................................................................................................................................... 6

Extension Column ................................................................................................................................................................ 7

Attaching Universal Adapter Plate to Projector ..................................................................................................................... 8

Summary of Contents for NP-P350W










Reviews: