NEC Display Solutions of America, Inc.
U300X Installation Guide
Desktop and Ceiling Mount
v1.1
www.necdisplay.com
U300X
Page 1 of 8
Contents
Product Description, Lens Specs, Notes and Formulas
Page 1
Diagrams and Distance Charts
Ceiling
Mounted
Installation
Page 2
Desktop Setup
Page 3
Cabinet Dimensions
Top,
Front
and
Right
Side Page 4
Bottom,
Back
and
Left
Side
Page 5
Optional
Wall
Mount
Dimensions Page 6
Optional Wall Mount Dimensions cont. Page 7
Input
Panel
and
Control
Codes
Page 8
Product
Description
Type:
1
chip
DMD
TM
Ultra Short Throw projector
Dimensions: 16.8”(W) x 7.9”(H) x 16.0”(D)
Weight:
14.3 lbs
Native Resolution: 1024 x 768 (1024x576 for 16:9 screens)
Screen Range: 63” – 85” Diagonal (4:3)
Brightness:
3000 lumens
Fan Noise: 36 dB / 32dB @ 1 meter
Power
Consumption:
360W
(max)
BTU’s:
1228
BTU/hour
Screen/Aspect Ratio_
Both 4:3 and 16:9 screens are fully supported
with proper aspect ratio control for both type sources using NEC developed
scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.
Notes
For screen sizes not indicated on the projection charts, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary
5%.
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug the screen width in for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3.
Definitions:
4:3 Screen Formulas:
W
=
Screen
width
W
= H x 4/3
H
=
Screen
height
H
= W x 3/4
A
= Distance between projector cabinet and screen
Screen Diagonal
= W x 5/4
B
= Vertical distance between projector foot
and
screen
center
C
= Throw distance
16:9 Screen Formulas:
D
= Vertical distance between projector foot and screen bottom
W
= H x 16/9
(screen
top
for
ceiling
mounted
application)
H
= W x 9/16
Screen Diagonal
= W x 18.868/16
Projection Formulas:
A
= C-13.48
B
=
0.631W
C
=
0.377W
D
=
0.256W