NEC Corporation of America
Visual Systems Division
42XR5 Installation Guide
42” Plasma Display
Rev 1.0
www.necvisualsystems.com
Page
1
of
11
PX-42XR5
Contents:
Product Description and Notes
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top & Bottom
Page 3
Rear
Page 4
Left & Right Side
Page 5
Display Dimensions w/Optional Speakers and Stand
Page 6
Optional Speakers and Stand Dimensions__
Page 7
Dimensions w/Optional Wall Mount
Page 8
Dimensions w/Optional Ceiling Mount
Page 9
Connections
Page 10
Control Codes
Page 11
Product Description
Type:
Plasma Display
Screen Surface: Anti-Reflective
Resolution:
1024x768
Dimensions:
40”(W) x 24”(H) x 3.9”(D)
Aspect Ratio:
16:9
Weight:
59.5 lbs
Color Correction: Bonded Color Filter
FCC:
Class B
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Maximum Tilt Angles
Below is the maximum angle that the display can be tilted
Landscape 30°
Max Tilt
