NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display
Rev 1.3
www.visualsystems.com
PX-61XM4
Page
1
of
10
Contents:
Product Description and Notes
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top & Bottom
Page 3
Rear
Page 4
Left & Right Side
Page 5
Display Dimensions w/Optional Speakers and Stand
Page 6
Dimensions w/Optional Wall Mount
Page 7
Connections
Page 8
Control Codes
Page 9
Product Description
Type:
Plasma Display
Screen Surface: Anti-Reflective
Resolution:
1365x768
Dimensions:
57.88”(W) x 34.64”(H) x 4.69”(D)
Aspect Ratio:
16:9
Weight:
134.5lbs
Color Correction: NEC CCF (Capsulated Color Filter, in panel)
FCC:
Class B
and AccuCrimson (in front filter)
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Maximum Tilt Angles
Below are the maximum angles that the display can be tilted in both landscape and portrait mode
Landscape 30°
Portrait 10°
Max Tilt
