NDA-31528
Issue 1.0
Call Indicator Lamp
This lamp flashes fast when a call is ringing, or
flashes slower when a message has been left.
Alphanumeric Display
The LCD has 3 lines, 24 characters with
backlight.
Exit
Exit any screen and return the display to “Time
and Date”.
Help Key
Explanations of Programmable Keys can be
called up on the LCD by pressing and holding
the
Help
key plus a programmable key.
Soft Keys
The Soft Keys show the available features for
your current activity. Any feature shown at the
bottom of the LCD is available.
Programmable Function Keys
Flexible Line keys or Feature keys assigned by
the System Administrator.
Flash Key
Press key to finish an outside call and hear the
dial tone.
Transfer Key
Allows the extension user to transfer established
calls to another extension.
Mute (Microphone) Key
Mute handset or handsfree microphone. LED
lights when microphone is muted.
DND (Do Not Disturb) Key
Set up a Do Not Disturb if pressed during a call.
Clear/Back Key
Press this key to cancel the current action or
delete a character.
Cursor Key
Access various features with simple operation.
Speaker
Controls built-in speaker, which can be used for
Hands Free Dialing/Monitoring. LED on key
lights when key is active.
Hold
Press this key to place an internal or external
call on hold.
Lift the Handset or press
Speaker
.
Dial the required number.
(For external calls, dial 9 first)
NOTE:
The access codes are default only, and may
have been changed for your system.
Without lifting handset, press the
REDIAL
button.
Press the Cursor key left/right to search
the required number.
Press the
Speaker
key or lift the handset
to initiate the call.
Ask the caller to please hold:
Press the
Hold
key – held key flashes.
You may replace handset if you wish.
To retrieve a call:
Lift the handset.
Press the flashing line.
NOTE:
For exclusive hold – press
Feature
+
Hold
.
Allows a user to intercom other digital handsets.
Lift the handset and dial extension
number.
Press
Voice
soft key and speak over the
intercom.
With a call in progress:
Press the
Transfer
key.
Dial an extension or external number and
announce the call (optional).
Replace the handset.
NOTE:
If the called extension is busy or does not
answer, press the
Flashing key
to return to your
caller. If the extension does not accept the call,
ask them to hang up and your call is returned.
With a call in progress (internal or external)
Press the
Conf
soft key.
Dial an internal or external number.
When the third party answers, press the
Add
soft key.
Press the
Begin
soft key to begin the
Conference.
A three way conference is now
established.
NOTE:
Any party may exit the conference by hanging
up. The two parties will remain connected, as
long as one of the remaining parties is internal.
FUNCTION KEYS
24 Button IP Tel
12 Button Digital Tel
MAKE A CALL
LAST NUMBER REDIAL
HOLD
VOICECALL
TRANSFER
CONFERENCE
SL1100
IP4WW-12TXH-B TEL
Digital Telephone
IP4WW-24TIXH-B TEL
IP Telephone
Reference Sheet
