Unscrew the male connector`s anti-kink
boot.
Remove the male connector`s front
housing.
u
We will need this male connector
later for mount into the panel.
Place the pulling tool (FORP-XP to be
ordered separately) on the male
connector.
Screw the pulling tool on the male
connector.
Pull the cable using the pulling tool to
the panel on which male connector
should be mounted. A snap hook can be
attached.
A
B
C
D
E
A
B
C
E
D
R
A S S E M B LY I N S T R U C T I O N
®
opticalCON DRAGONFLY
|
Cable Assembly
NKO2SMW-XP-*
FOPR-XP
SNAP HOOK
Page 1
BDA 632
1
Assembly of the pulling tool FORP-XP
Pulling tool:
FORP-XP
