Home
OK
Set
Select Arrows
How to setup the KAON box
1. Connect the included HDMI cord to the box and to the HDMI port in the back of your TV.
a. If you do not have an HDMI port on your TV, you may instead connect with an analog composite cable
and adapter (not included).
2. Connect the included power cord to the back of the box and to a power source.
3. Turn on your TV. Select the appropriate HDMI input to which your
KAON box is connected.
4. Install the included batteries in the remote control.
5. After your box and TV are turned on, the screen will prompt you to
sync your remote. First, press the SET button for 3 seconds.
Remote will flash green. Press the HOME button. With your remote
control, enter the three digit number that appears on the screen.
6. Select SKIP and press OK to continue.
7. The screen will prompt you to select your Wi-Fi network and enter
your Wi-Fi password.
INSTALL GUIDE -
KAON Box
1
2
