background image

LIMITED WARRANTY 

Nexland guarantees that every Internet Sharing Box is free from physical defects in material

and workmanship under normal use for five (5) years from the date of purchase.  If the 

product proves defective during this warranty period, call Nexland Support to obtain a Return 

Authorization number.  Be sure to have purchase information or invoice available when 

calling.

LIABILITY LIMITATION 

IN NO EVENT SHALL NEXLAND’S LIABILITY EXCEED THE PRICE PAID FOR THE 

PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL 

DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING 

SOFTWARE, OR ITS DOCUMENTATION.  Nexland makes no warranty or representation,

expressed, implied, or statutory, with respect to its products, and specifically disclaims its

quality, performance, merchantability, or fitness for any particular purpose.  Nexland reserves

the right to revise or update its products, software, or documentation without obligation to

notify any individual or entity.

FCC STATEMENT 

The Internet Sharing Box has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide a 

reasonable protection against harmful interference in a residential installation.  This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and 

used according to the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.  If

this equipment does cause harmful interference to radio or television reception, which is found

by turning the equipment off and on, the user is encouraged to try to correct the interference 

by one or more of the following measures:

• Reorient or relocate the receiving antenna 
• Increase the separation between the equipment or device 
• Connect the equipment to an outlet other than the receiver’s 
• Consult a dealer or an experienced radio/TV technician for assistance 

© 2001-2002 Nexland, Inc. All Rights Reserved 
Pro, WaveBase and Technology that’s Securing the Internet are trademarks of Nexland, Inc. 

Windows is a trademark of Microsoft Corporation. Macintosh is a trademark of Apple 
Corporation.  All other trademarks and brand names are the property of their respective 
proprietors. 

Nexland, Inc. 
1101 Brickell Avenue 
North Tower • 2

nd

 Floor 

Miami, FL  33131 

V2.1 

Summary of Contents for WaveBase Pro Series






































Reviews: