background image

Tools Needed

Helpline

If you have any problems with this product or 
require any replacement fittings please contact 
Customer Services Tel: 0844 844 8999

• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if 
necessary.

• Regular cleaning is essential to avoid build up of these products on the surface.
• Avoid exposure to direct or prolonged periods of sunlight and position away from direct heat sources 
such as radiators.

• Care should be taken to avoid spilling anything on the upholstery. If a spillage occurs act promptly and 
soak up any liquids by blotting with a clean absorbent cloth. Never rub to remove stains. Never use a wet 
cloth.

• If a spillage does occur, blot any liquids immediately with a clean, dry absorbent cloth and allow to dry 
naturally.

• For more stubborn stains a professional upholstery cleaner should be consulted.
• Clean periodically in situ using a professional cleaning company.

• Made with fabric covering. 
• Fabric content: 64% polyester, 36% viscose.

• 

Made in China.

CARE INSTRUCTIONS

• Hair products such as hairsprays, oils and gels may affect the finish. Avoid prolonged contact with such 
products.

• Carefully check that you have all the parts before beginning assembly. 
• Keep fittings out of children’s reach and keep children well away from construction area.
• We suggest you retain these instructions for future reference.
• A minimum of 2 persons is required to assemble this product.
• We recommend that the packaging is used to protect the surfaces during assembly.

PRODUCT INFORMATION

ASSEMBLY INSTRUCTIONS.

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the 
item is found to be faulty. Should you need to return the unassembled product, please repack in the 
original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step by step 
instructions.

 PORTOFINO MINK BED 

Page 1 of 5

Summary of Contents for PORTOFINO MINK BED






Reviews: