Installation, Operation
and Maintenance Manual
TurboTAC Salt-Free Limescale Prevention
and Water Filtration
Model: Compact
Installation, Operation
and Maintenance Manual
Salt-Free Scale Prevention
and Water Filtration
Model OFPSYS
IOM-WQ-
OFPSYS
WARNING
!
Please read carefully before proceeding with
installation. Your failure to follow any attached
instructions or operating parameters may lead to the
product’s failure.
Keep this Manual for future reference.
If you are unsure about installing your WATTS water filter, contact
a WATTS representative or consult a professional plumber.
Test the water periodically to verify that the system is performing
satisfactorily. Discard small parts remaining after the installation.
Failure to install the system correctly voids the warranty.
Handle all components of the system with care. Do not drop,
drag or turn components upside down.
Be sure the floor under the water filter system is clean, level
and strong enough to support the unit.
IMPORTANT
CAUTION
!
NOTICE
WARNING
!
Untreated private well water may contain contaminants
with levels outside of the operating guidelines. Do not use
with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the
system.
OFPSYS ™ system is certified
by the Water Quality Association (WQA) to
NSF/ANSI Standard 372 for lead free.
IOM-WQ-.indd 1
10/15/2015 11:22:12 PM
BS6920
CERTIFIED
Certified to
NSF/ANSI
42/
61
Turbo
TAC
Compact
Next Filtration /
www.abtapdirect.com
IMPORTANT
If you are unsure about installing the filter, contact your supplier or consult a professional plumber.
NOTICE
Failure to install the system correctly voids the warranty. Handle all components of the system with care.
Do not drop, drag or turn components upside down. Use wall mounting bracket provided and fix securely.
If installed on the floor, be sure the floor under the water filter system is clean, level and strong enough to
support the unit.
hard water, easy solution.